SFA - SANITOP Sanitary Disposer Adaptable Horizontal Outlet

SFA evacuation systems

A sanitary grinder or evacuation pump, is a device that allows to grind and evacuate wastewater in a different way than the traditional one, which would be through 100 mm diameter pipes. With this machine, solid elements can be converted into liquids thanks to the grinding process, which then leads the waste to the downspout.

The shredders contain blades that shred the waste into fine particles, after which a turbine pumps the resulting liquid, propelling the waste into the downspout.

Thanks to this system, the mass that has been shredded is moved to the general downspout or wherever a septic tank is located. By having a grinder, the evacuation pipe can be narrower and is very useful when there is not enough space to place a downpipe between 100 and 110 mm in diameter.

It is important to keep in mind that a grinder can have as many inputs as elements need to be connected, so before choosing grinders it is necessary to plan how many mechanisms will be connected due to the fact that an input is required for each element.

SFA SANITOP

The system collects wastewater coming from the toilet with horizontal outlet and the sink. It grinds all the matter and thus allows to evacuate everything with a tube of only 23 mm in diameter.

It is very easy to install. It is connected directly to the horizontal outlet of the ceramics, the evacuation for the sink is connected to the upper inlet of the equipment. The toilet cistern is connected to the water mains and the disposal of the macerator is connected through a 32 mm diameter pipe to the mains.

The SANITOP disposer features the latest SFA developments on noise reduction. The device includes a set of silent-blocks that allow to absorb a large part of the transmitted noise: It operates in short grinding cycles of 2-3 seconds and generates less noise than a refilling external tank.

SANITOP Features

• Number of inputs available - 2
• Diameter of inputs - 100/40 mm
• Recommended evacuation diameter - 32 mm
• Motor power consumption - 400 W
• Power supply voltage - 220-240 V/50 Hz
• Electrical class - 1
• Protection rating - IP44
• Maximum horizontal offset - 100 m
• Maximum vertical evacuation - 5 m
• Start-up height - 95 mm
• Evacuation diameter - 22/28/32 mm
• Flow rate at 3 meters - 65 L/min