SFA - SANIVITE Kitchens and Laundry Rooms Evacuation Pump

SFA evacuation systems

A sanitary grinder or evacuation pump, is a device that allows to grind and evacuate wastewater in a different way than the traditional one, which would be through 100 mm diameter pipes. With this machine, solid elements can be converted into liquids thanks to the grinding process, which then leads the waste to the downspout.

The shredders contain blades that shred the waste into fine particles, after which a turbine pumps the resulting liquid, propelling the waste into the downspout.

Thanks to this system, the mass that has been shredded is moved to the general downspout or wherever a septic tank is located. By having a grinder, the evacuation pipe can be narrower and is very useful when there is not enough space to place a downpipe between 100 and 110 mm in diameter.

It is important to keep in mind that a grinder can have as many inputs as elements need to be connected, so before choosing grinders it is necessary to plan how many mechanisms will be connected due to the fact that an input is required for each element.

SFA SANIVITE

It allows you to get rid of the technical requirements of an apartment. It is not necessary to install the kitchen or laundry room right next to the downspout of the house so that the water can fall by gravity. The SANIVITE equipment can lift the water up to 5 meters high or 50 meters away.

This pump has been developed to withstand hot water coming from household appliances, but can also be used to evacuate water from a bathroom equipped with a shower, bidet, sink or bathtub. It has an automatic starter that starts the motor when the water enters the tank.

It has 4 inlets of 40 mm diameter: 2 located at the top and 2 at the bottom of the sides. The device includes a pre-equipped drainage elbow with a non-return valve that can lift the water through a 28 or 32 mm diameter pipe.

Features SANIVITE

• Number of available entries - 3
• Inlet diameter - 40 mm
• Recommended evacuation diameter - 22/28/32 mm
• Motor power consumption - 400 W
• Power supply voltage - 220-240 V/50 Hz
• Electrical Class - 1
• Protection rating - N/A
• Sound level - 42 dB(A)
• Maximum horizontal offset - 50m
• Maximum vertical offset - 5 m