CTX - Multi-action Chlorine CTX-390 granulated 25 kg

Features

Granular solid compound, specially formulated so that with its single application in the pool water, it manages to eliminate bacteria, viruses and microorganisms in general, prevent the development of algae and keep the water transparent and crystal clear.

How to use

Always adjust the pH before adding chlorine to the water, to make it as effective as possible.
Introduce the necessary dose of ctx390 Multiaction inside a skimmer, then turn on the filtration equipment, so that the product can be dissolved when the water circulates through the skimmer.

The dose of ctx390 Multiaction can also be spread evenly over the surface of the pool. The addition should preferably be done at dusk and without the presence of bathers in the pool water.

The free residual chlorine should be between 0.5-2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.

Dosage

Treatment Start of season: Add 15 grs. of ClorShock per m3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using ctx 10 pH Minus solid or ctx 20 pH Plus solid.

This treatment should be repeated whenever a lack of transparency in the water is noticed.

Maintenance Treatment: Add daily 1 to 2 grs. of ctx390 MULTIACTION per m3 of water.

These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.