CTX - ClorShock CTX 200/gr Chlorine shock...
Cloro de la marca CTX
- Formato de 5 kg
- Disolución y acción rápida
- No modifica el pH
¡Compre CTX en Brico&Pool!¡Garantía asegurada!
Guarantee safe & secure checkout
Features
Highly stabilized, slow-dissolving organic compound for the treatment and disinfection of swimming pool water.
Mode of use and dosage
Initial Treatment: Add 10 grs. of product for each m3 of water. After 2 hours, adjust the pH
of the water between 7.2 and 7.6 using pH Minor solid or pH Plus solid.
Maintenance Treatment: With the pH of the water adjusted, add daily 1 to 2 g of product per m3 of water.
These doses are for guidance only and may be modified depending on the characteristics of each pool, climate, etc.
The initial treatment (Superchlorination) should be repeated whenever a lack of transparency in the water is observed.
Introduce the necessary dose of product inside a skimmer, then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmer.
It is also possible to spread the product dose over the pool surface equally. The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water.
The free residual chlorine should be between 0.5-2 mg/l. This value can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.