Previous
Next
CTX - Hypocal hypochlorite granules CTX-120 5 kg
€59.00
Tax included
Order before 3:00 p.m. today and your order will be processed the same day.
Shipping 48/72 hours for orders with stock.
dolphin" style="margin-left:auto;margin-right:auto;" width="1250" height="340" />Features
Fast-dissolving granular compound for disinfection and maintenance of crystal clear and hygienically pure water.
How to use
Always adjust the pH before adding chlorine to the water, to make it as effective as possible.
Introduce the necessary dose of product inside the skimmers and then turn on the filtration equipment, so that the product can be dissolved as it circulates through the skimmers.
It is also possible to spread the product dose over the pool surface equally. The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water.
The free residual chlorine should be between 0.5-2 mg/l. This value can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.
Contact of the product on the pool surfaces should be avoided in pools made of polyester, liner or vinyl, as discoloration will occur on these surfaces.
Dosage
Treatment Start of season: Add 15 grs. of ClorShock per m3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using ctx 10 pH
Minus solid or ctx 20 pH Plus solid.
This treatment should be repeated whenever a lack of transparency in the water is noticed.
Maintenance treatment: With the pH of the water adjusted, add 1 to 2 grams of product daily, per m3 of water.
These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.
