Astralpool - Chlorine shock granulated 5 kg

Features

Due to its high solubility in water, the required amount of residual chlorine is quickly obtained.

It is a product especially indicated for disinfection in pools made of polyester, liner, painted or vinyl, due to its fast dissolution, which prevents discoloration on these types of surfaces.

Its easy dissolution in water, allows through a dosing pump to automate the disinfection of the water in the pool.

The free residual chlorine obtained in the water offers greater stability against the sun's ultraviolet rays than other products.

It does not modify the pH of the water

Mode of use and dosification

Initial Treatment: Add 15 grs. of product for each m3 of water. After 2 hours, adjust the pH

of the water to between 7.2 - 7.6 using Solid pH Reducer (0010) or Solid pH Increaser (0020).

Maintenance Treatment: With the pH of the water adjusted, add daily 1 to 3 grs. of product per m.3 of water.

These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.

The initial treatment (Superchlorination) should be repeated whenever a lack of transparency in the water is observed.

Introduce the necessary dose of product inside a skimmer, then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmer.

It is also possible to spread the dose of product over the surface of the pool equally. The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water.

The free residual chlorine should be between 0.5-2 mg/l. This value can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least 2 times a day..

.