CTX - ClorShock CTX-250 Chlorine shock tablet (0% Boric) 5 kg

Features

Highly stabilized, fast-dissolving chemical compound for disinfection and maintenance of crystal clear, hygienically pure water.

Due to its high solubility in water, the required amount of residual chlorine is quickly obtained. The free residual chlorine obtained in the water offers greater stability against the sun's ultraviolet rays than other products.

This product is suitable for the disinfection of pools built with ceramic materials, but should not come into direct contact with pools made of liner, polyester, vinyl or painted, as it may cause discoloration.

How to use

Always adjust the pH before adding chlorine to the water, to make it as effective as possible.

A) Introduce the necessary dose of product inside a skimmer, then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmer.

B) The product can also be introduced in a floating dispenser (suitable for the size of the tablets and the quantity of product to be dosed).

The addition of the product should preferably be done at dusk and without the presence of bathers in the pool water. The free residual chlorine should always be between 0.5-2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.

Dosage

Initial Treatment: Add 7 tablets of product per 10 m.3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using ctx 10 pH Minus solid or ctx 20 pH Plus solid.
This treatment should be repeated whenever a lack of transparency in the water is observed.

Maintenance treatment: With the pH of the water adjusted, add 1 tablet of product per 10 m3 of water daily.

These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc..