CTX - ClorShock Chlorine shock CTX-200 granulated 25 kg

dolphin" style="margin-left: auto; margin-right: auto;" width="1250" height="340">

Features

Due to its high solubility in water, the required amount of residual chlorine is quickly obtained. It is a product especially indicated for disinfection in pools made of polyester, liner, painted or vinyl, due to its fast dissolution, which avoids discoloration on this type of surfaces. Its easy dissolution in water, allows through a dosing pump to automate the disinfection of the water in the pool. The free residual chlorine obtained in the water, compared to other products, offers greater stability against ultraviolet rays of the sun and also does not modify the pH of the water.

How to use

Always adjust the pH before adding chlorine to the water, to make it as effective as possible.
Introduce the necessary dose of product inside a skimmer, and then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmer.
It is also possible to spread the dose of product over the surface of the pool equally.
The addition of product should preferably be done in the evening without the presence of the bather in the pool water.

Dosage

Treatment Start of season: Add 15 grs. of ClorShock per m3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using ctx 10 pH Minus solid or ctx 20 pH Plus solid.

This treatment should be repeated whenever a lack of transparency in the water is noticed.

Maintenance Treatment: With the pH of the water adjusted, add daily 1 to 3 grams. of product per m3 of water.

These doses are for guidance only and may be modified depending on the characteristics of each pool, climate, etc.