Features of the AstralPool
Its composition is polyethylene-based.
It is joined by ultrasonic welding.
The edges are sewn by polyethylene piping.
The fastening is by means of:
- Eyelets at each end on the first side of the width.
- Eyelets home 65 cm. approximately on the second side of the width.
It is composed of nickel-plated brass eyelets.
It is supplied in cardboard box with protective cover and instruction manual.
Thickness of 400 μm.
Finish types:
- Model NB. It only presents cut, it has neither piping nor eyelets and does not allow the use of a winder.
- - ECO model. Features polyethylene piping, which is stitched on both width sides. Brass eyelets appear on one side every 65 cm on one side. Features two brass eyelets on the ends of the other side.
- Luxe model. Features polyethylene perimeter piping that is stitched. Brass eyelets appear on one side every 65 cm. on one side. Features two brass grommets on the ends of the other side.
Minimum purchase of 10 square meters. *Price quoted is for this quantity.
Any Non-Standard shape that requires a template for its manufacture will be considered a FREE SHAPE.
for the shapes you need to take the correct measurements in order to adapt it to the established templates.
For this, describe the shape of the vessel in a rectangle; L is the length and I is the height. Area= L x I
In case the vessel is a free form, and the standard templates cannot be applied, an extra amount will be applied.
The templates must be factory checked and with perfectly visible strokes to avoid any possible error.