CTX - AlgiControl Algae Destroyer CTX-575 3 l 71654

Features

This product is able to remove green algae which are a type of algae has a tendency to remain suspended in the water, giving a green coloration.They also tend to adhere to the entire surface of the vessel. In addition, it is capable of eliminating brown, yellow and red algae that have a tendency to adhere to the walls and entrench themselves in areas that are difficult to access. The yellow-brown algae usually spread over the entire surface of the pool walls and give a yellowish effect to the pool water. At the same time, it has the ability to eliminate black algae, which appear in the form of small isolated spots and are usually located in strategic and often difficult to access points. Traditional treatments are generally ineffective for their elimination.

"Caution:

This product is not recommended for liner and polyester pools as the accumulation of copper in the water can cause staining on both the bottom and walls of the pool."

How to use

This product should be added when there are no bathers in the pool and at dusk. Turn off the filtering system.
2. Use a brush to vigorously scrape affected areas.
3. Add the product to the affected areas.

4. Leave the product for 4 to 8 hours depending on the type of algae and brush again.

5. Turn the filtering system back on.
Repeat the process one week later if there are still traces of black algae.

Dosage

Add 200 ml of product per 10 m3 of water depending on the type of algae and its proliferation.

These doses are indicative and can be modified depending on the characteristics of each pool, climatology, etc.