Bwt - Mypool Inverter Heat Pump
- Write a review
Bomba de calor Inverter Mypool de BWT
- Bomba de calor Mypool con tecnología inverter.
- Bomba para piscinas de hasta 70m³.
- Compresor Inverter
- Temperatura mínima de funcionamiento: 0°C .
¡Compra tu bomba de calor Inverter Mypool y consigue envío gratuito en Brico&Pool!
What is a heat pump?
A heat pump is a system that uses a small amount of energy to move heat from one place to another, providing an ideal temperature all year round. With it you can obtain heating, cooling and domestic hot water with the same equipment in a simple, economical and environmentally friendly way.
BWT myPOOL Inverter heat pump
The BWT myPOOL inverter heat pump is an efficient and durable solution for heating your pool. So you can enjoy bathing pleasure in perfectly warm pool water and extend the swimming season.
Inverter principle.
Thanks to inverter technology, BWT's myPool heat pump can vary its power between 20% and 80% (depending on operating conditions and outdoor temperature) for optimal settings. It automatically measures and regulates to ensure the desired pool temperature.
Heat pump features
- Durable: the myPool Inverter heat pump turns on and off much less than a conventional heat pump. This not only protects the cooling system, but also allows for a longer service life.
- Quiet: inverter heat pumps are much quieter than conventional heat pumps, as they can reduce impeller speed and compressor power.
- Efficient: the myPool Inverter heat pump automatically switches to energy-efficient partial load when full heat output is not needed. This leads to significantly lower energy consumption.
- EEV technology: using an integrated electronic expansion valve, it regulates the gas flow in the heating system, ensuring maximum efficiency and the lowest possible energy consumption.
- Screw-shaped titanium heat exchanger: the titanium heat exchanger is resistant to all pool chemicals and can also work with salt electrolysis systems.
- Inverted circuit defrosting: the integrated automatic defrosting allows operation even at very low outside temperatures.
- Silver soldering: the gas tube system is silver soldered for maximum tightness and long service life.
MP-IPH range comparison table
Model | MP-IPH 50 | MP-IPH 62 | MP-IPH 80 | MP-IPH 96 | MP-IPH 125 |
MP-IPH 165 | ||
Recommended pool capacity |
m³ |
10-24 | 14-28 | 20-35 | 20-40 | 30-55 | 35-70 | |
Performance with water at 26°C and air at 26°C |
||||||||
Heating capacity | kW | 5 | 6.2 | 8 | 9.6 | 12.5 | 16.5 | |
C.O.P | 5.8-9.4 | 5.9-9.5 | 5.6-9.1 | 5.7-9.5 | 5.9-10.5 | 5.7-10 | ||
Performance with water at 26°C and air at 15°C | ||||||||
Heating capacity | kW | 4 | 4.8 | 6 | 7.3 | 9 | 12 | |
C.O.P |
4.3-5.9 | 4.4-5.9 | 4.1-5.9 | 4.3-6 | 4.2-5.9 | 4.2-6 | ||
General Data | ||||||||
Operating temperature range |
ºC |
0º - 43º | ||||||
Compressor type | Inverter (sourced from Toshiba) | |||||||
Coolant type | R32 | |||||||
Voltage | V | 230V (Single-phase) | ||||||
Power rating | kW | 0.29-0.83 | 0.29-1 | 0.34-1.4 | 0.29-0.83 | 0.29-1 | 0.34-1.4 | |
Nominal current | A | 1.87-3.78 | 1.26-4.74 | 1.48-6 | 1.52-7.39 | 1.57-8.7 | 2.48-11.7 | |
Water flow |
m3/h |
2-4 |
2-4 | 2-4 | 3-6 | 4-6 | 6-8 | |
Exchanger | Titanium PVC spiral | |||||||
Water connection | Ø(mm.) | 50mm. | ||||||
Number of fans | 1 | |||||||
Dimensions/Weight | ||||||||
Weight | kg | 42 | 42 | 46 | 47 | 49 | 60 | |
Dimensions | mm | 750*360*650 | 860*360*650 | 960*360*650 |
.