QP Products - Opson Pro cleaners

The QP Opson Pro electric pool cleaner is the ideal pool cleaner for above-ground and in-ground pools, medium-sized pools up to 15 metres long and any shape (circular, square, rectangular, oval) and liner (liner, gresite, polyester, concrete, etc.). Its traction combined with the cleaning rollers means that no obstacle can slow you down in your cleaning tasks.

The QP Opson Pro is an electric pool cleaner. These are systems that are programmed and connected to the mains to clean the pool surface autonomously. They have their own filtration system, are easy to store, easy to transport and work silently.

To start using this model of electric pool cleaner, a series of steps must be followed. First of all, it is recommended that you fully charge the robot's battery, thus preventing it from running out of power during immersion. The QP Opson Pro pool cleaner has a battery life of more than 3 hours.

To start it up correctly, it is recommended that the robot is immersed in the centre of the length of the pool. Once this has been done, the electric pool cleaner must be immersed vertically in the water and moved in all directions, in order to eliminate any air that the robot may have inside.

The QP Opson Pro robot pool cleaner is ultra light, which makes it very easy to transport and store. In terms of filtration, it has a high volume compartment. Here all the dirt is collected for easy removal by the user by rinsing it out with the hose.

If the cleaner is left in the pool once it has completed its cleaning cycle, you should be aware that chemicals commonly used in pools, such as flocculant, can damage the cleaner or its filters. This is considered negligence on the part of the user and the warranty does not cover any damage caused by chemical materials in the robot.

Once the cleaning cycle is complete, it is best to remove the robot from the pool, remove the filtration compartment, clean it with the hose and clean the robot. When storing the robot for a long period of time, it is advisable not to leave the battery fully charged as it may be subject to degradation.

The robot is covered by a 3-year warranty offered by the manufacturer in accordance with Royal Decree-Law 7/2021 of 27 April. You can see the warranty conditions in the warranty document included in the documents section.

The warranty is offered by the manufacturer and the manufacturer is responsible for the repair or replacement of the product as long as the customer uses the product correctly following the specifications and guidelines indicated by the manufacturer*.

*The correct functioning and performance of all the robot's functions on the bottom is not guaranteed if the pH level is not correct, if it contains slime or algae or if the filters are saturated by excess dust and dirt, and if the filtration basket has not been thoroughly cleaned beforehand, as well as any pool with uneven surfaces such as ribs, including steps. When charging the robot make sure that it is completely dry, that the charging port area is not damp or wet.