Dolphin - C6 pool robot pool cleaner

The Dolphin C6 electric public pool cleaner is a Dolphin public pool robot with excellent specifications and a host of technologies for ease of use. This pool cleaner features technologies such as the Clever Clean scanning system with gyroscope and is suitable for all types of pools, including saline chlorinated pools, with a maximum length of 25 metres. This electric pool cleaner is recommended for in-ground public pools. The difference between pools is that above-ground pools with rigid walls are placed on the ground without the need for building work, so they are higher and the walls are visible. On the other hand, the in-ground pool is flush with the ground, so the hole in which the pool is to be installed must be dug out beforehand.

The Dolphin C6 cleans the bottom of the pool completely, adapting to all types of surfaces and in different cycles to be selected by the user. It will carry out a complete cleaning thanks to its double filtration bag.

The Dolhpin C6 is an electric pool cleaner. It is a programmable system that requires mains power to operate. What are its main features? They have their own filtration system, which means that it is not necessary to program the system any more than usual for the cleaner to do its job. In addition, they are autonomous and independent.

Electric pool cleaners are devices that work silently. They are easy to store and transport. Their work cycles are very short and their energy consumption is lower than what is normally needed to operate the pool's filtration equipment, etc... There are only advantages!

To start using this model of electric pool cleaner, a series of steps must be followed. First of all, it is recommended to extend the length of the cable next to the pool, thus avoiding the risk of entanglement during immersion. The pool cleaner has a 30 metre long cable with a Swivel anti-tangle system.

To start it up correctly, it is recommended that the robot is immersed in the centre of the length of the pool or, each time it is placed in the pool, the corner in which it is placed should be alternated in rotation. Once this has been done, the electric pool cleaner must be immersed vertically in the water and moved in all directions, in order to eliminate any air that the robot may have inside.

The robot is guaranteed for 3 years by the manufacturer in accordance with Royal Decree-Law 7/2021 of 27 April. You can see the warranty conditions below. Each manufacturer suggests certain requirements, so the limitations of the warranty coverage will depend on the manufacturer.

The warranty is offered by the manufacturer and the manufacturer is responsible for the repair or replacement of the product as long as the customer uses the product correctly following the specifications and guidelines indicated by the manufacturer*.

*The correct functioning and performance of all the functions of the robot both on the bottom and on the walls is not guaranteed as long as the pH level is not correct, it contains slime or algae or the filters are saturated by excess dust and dirt, and a total cleaning of the filtration basket has not been carried out beforehand, as well as any pool with irregular surfaces on the walls such as ribs, including pool steps.