Pump TIPER whirlpool and spa
Single-cell centrifugal pump conceived for the purpose of recirculating and filtering water in whirlpools and spas. With a body, diffuser and impeller designed in technopolymer in order to make the pump resistant and durable against possible corrosion caused by weather conditions and chemical products used for spa maintenance. Thanks to the construction of the AISI-420 stainless steel motor, the Espa pump can work with water at a higher temperature than other pumps on the market, with the capacity to work with water up to 50ºC temperature. It has a suction port of 50mm Ø and a discharge port with a diameter of 32mm. Both suction and discharge are fixed by means of mechanical seals. It has an IPX5 water and dust tightness certificate.
Pump features
The ESPA TIPER hydromassage and spa pump stands out for the following features:
- Pump body, impeller, diffuser, suction and impeller in technopolymer.
- Motor shaft in AISI 431 stainless steel.
- Mechanical seal in alumina-graphite.
- Aluminum motor housing.
- Seals in NBR/EPDM.
- Asynchronous 2-pole.
- IPX5 protection.
- Class F insulation.
- Built-in thermal protection.
- Continuous service.
- Unions included: Tiper suction 50 mm and discharge 32 mm; and tpiper 2: suction 50 mm and discharge 40 mm
Tiper comparison table
| Model |
|
|
TIPER 70 |
TIPER 90 |
TIPER 125 |
| Code |
|
208183 |
208184 |
137548 |
| Power |
hp |
0.5 |
1 |
1.25 |
| Intensity |
A |
2.80 |
3.80 |
6.3 |
| Power absorbed |
Kw |
0.7 |
0.9 |
1.3 |
| Electrical Outlet |
230V - 50Hz / Single phase |
| Maximum water temperature |
ºC |
50ºC |
Tiper 70/90 power curves
Dimensions (mm.) Espa Tiper 70/90
| Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
WEIGHT (Kg.) |
| Tiper 70 |
100 |
166 |
150 |
348 |
43 |
106 |
190 |
88 |
2 1/4" |
2 1/4" |
4.0 |
| Tiper 90 |
100 |
166 |
150 |
348 |
43 |
106 |
190 |
88 |
2 1/4" |
2 1/4" |
4.5 |
.
