Bayrol - Protect&Clean 350ml
Protect & Clean for your pool by Bayrol
- Gel cleaner
- Specially suitable for the waterline and skimmers
- Eliminates grease and lime deposits
- Easy to use
Buy Bayrol at Brico&Pool!Guaranteed warranty!
Order before 3:00 p.m. today and your order will be processed the same day.
Shipping 24/48 hours for orders with stock.
Lowest internet price guaranteed. Contact us if you have any questions.
Features
Detergent cleaner, specially created to remove calcareous incrustations, organic residues and mineral sediments that over time are formed and adhere to the surfaces of the pool.
It is a product designed for cleaning the pool tank and the inside of plastic filters.
How to use
1) General Cleaning Of The Empty Pool.
a) Apply the product undiluted on the surfaces to be cleaned with a sprayer, spreading the
product on walls and bottom.
b) Leave to act for about 1⁄2 hour and rinse with plenty of water. If the incrustation
persists, the operation must be repeated.
It is advisable to use a brush on the parts where the incrustation is more intense.
2) Filter Cleaning: (This treatment is only valid for filters whose filtering load is flint or sand)
a) Empty the water completely from inside the filter.
b) Open the top of the filter and pour the product inside, making sure it covers the load
filter.
c) Let the product act for approximately 1⁄2 hour.
d) Close the filter and then perform an intense washing.
*DO NOT USE this product on chrome, galvanized or tin-plated surfaces
RECOMMENDATIONS
1) Before cleaning the pool basin, its surfaces should be thoroughly wetted with water
(tile, tiles, etc.).
2) After cleaning with Surface Descaler Extra, rinse the surfaces with
plenty of water, to thoroughly remove the product residues.
3) If cleaning is done outdoors, avoid working in direct sunlight and allowing the product to dry. 4) For a first cleaning, we always recommend using the product undiluted.
Dosage
Use 20 L. of Descaler Extra per 100 m3 of pool water volume.
These doses are for guidance only and may be modified depending on the hardness and salt content of the water.