Astralpool - Slow chlorine tablets 5 kg

Features

Highly stabilized, slow-dissolving solid compound for disinfection and maintenance of crystal clear, hygienically pure water.

Product suitable for the disinfection of pools built with ceramic materials.

This product should not come into direct contact with pools made of liner, polyester or vinyl, or painted, as it may cause discoloration.

Mode of use and ddosage

Initial Treatment: Add 15 grs. of granulated Dichloro (0200GR) for each m3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using Solid pH Reducer (0010) or Solid pH Increaser (0020).

Maintenance treatment: With the water pH adjusted, maintenance treatment can be performed in two different ways:

A) Place 1 Trichloro compact (1395) per 20 m3 of water in the skimmer baskets every 7 days.

B) In those installations where a dosing device is used, fill it with Trichloro compacts (1395) and then circulate the water through the dosing device.

These doses are for guidance only and may be modified depending on the characteristics of each pool, climatology, etc.

The initial treatment (Superchlorination) should be repeated whenever a lack of transparency in the water is observed.

Introduce the necessary dose of product inside the skimmers, then turn on the filtration equipment, so that the product can be dissolved as the water circulates through the skimmers.

It is essential that the entire volume of water in the pool is recirculated through the filtering equipment on a daily basis.

Free residual chlorine should be between 0.5 and 2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.