Aiper - Scuba S1 Wireless Robot Cleaner

The Aiper Scuba S1 electric pool cleaner is a state-of-the-art wireless robot from Aiper, with excellent specifications and the latest Aiper technologies. This pool cleaner is small and lightweight and adapts to all types of pools, above and below ground, with a maximum length of 15 metres. This electric pool cleaner is recommended for all types of pools. The difference between pools is that above-ground pools with rigid walls are placed on the ground without the need for building work, so they are higher and the walls are visible. On the other hand, the in-ground pools are flush with the ground, so for their installation the hole in which we want the pool to be must be excavated beforehand.

The Aiper Scuba SE does a complete cleaning of the pool in several selectable cycles thanks to its long-lasting battery (150 minutes). It will carry out a complete cleaning thanks to its large capacity filter which will remove all the waste from the pool.

The Aiper Scuba S1 is an electric pool cleaner. It is a programmable system that works with Lithium Ion batteries. What are its main features? They have their own filtration system, which means that it is not necessary to program the system more than usual for the cleaner to do its job. In addition, they are autonomous and independent.

Electric pool cleaners are devices that work silently. They are easy to store and transport. Their work cycles are very short and their energy consumption is lower than what is normally needed to operate the pool's filtration equipment, etc... There are only advantages!

To start using this model of electric pool cleaner, there are a number of steps to follow. First of all, the cleaner's battery must be fully charged before the first cleaning.

To start it up correctly, it is recommended that the robot is immersed in the centre of the length of the pool or, alternately, each time it is placed in the corner of the pool. Once this has been done, the electric pool cleaner should be immersed vertically in the water and moved in all directions, in order to eliminate any air that the robot may have inside.

The Aiper Scuba S1 robot pool cleaner is as light as a feather, which makes it very easy to transport. In addition, it does not have a cable that gets in the way when storing it or gets tangled. As for its filtration, it has a fine filtration mesh, which can be easily accessed for cleaning and replacement.

The robot is covered by a 3-year warranty offered by the manufacturer in accordance with Royal Decree-Law 7/2021 of 27 April. You can see the warranty conditions in the warranty document included in the documents section.

The warranty is offered by the manufacturer and the manufacturer is responsible for the repair or replacement of the product as long as the customer uses the product correctly following the specifications and guidelines indicated by the manufacturer*.

*The correct functioning and performance of all the functions of the robot both at the bottom and on the walls is not guaranteed as long as the pH level is not correct, it contains slime or algae or the filters are saturated by excess dust and dirt, and the filtration basket has not been thoroughly cleaned beforehand, as well as any spa with uneven surfaces on the walls such as ribs, including steps. When charging the robot make sure that it is completely dry, that the charging port area is not damp or wet.