Model |
OT 10 |
OT 18 |
OT 25 |
Reference |
WWW000159 |
WWW000160 |
WWW000161 |
Chlorine production |
10 g/h |
| 18 g/h |
25 g/h |
Water volume |
40 m³ |
70 m³ |
110 m³ |
Power |
Max. 200 W |
Nominal output amperage |
2.0 A |
3.6 A |
5,0 A |
Operation mode(s) |
Normal, Boost (100%) and Low (deck mode adjustable from 0 to 30%) |
User interface |
Backlit LCD display 4 lines (11 languages available) |
Clock timer |
24 h clock / 2 chlorination slots
2 programmers for single-speed filtration pumps
|
Recommended salt rate |
4 g/l - 3 g/l minimum |
Polarity reversal |
Yes, from 2 to 8 h (factory setting at 5 h) |
Safety |
"Lack of salt" indicator: reduces production to protect the electrode. Lack of flow" indicator: interruption of production until conditions are not optimal. Mechanical flow detector
|
Minimum flow rate (required to purge air from the cell) |
5 m³/h |
Maximum flow rate (limited by system losses) |
18 m³/h (bypass mandatory for higher flow rates) |
"Quick Fix" |
Diameter 50 or 63 mm |
Maximum allowable cell pressure |
2.75 bar (KPa) |
Minimum water temperature |
5ºC |
Maximum water temperature |
40ºC |
Protection rating |
IP43 |
Cable length box-cell |
1.8 m |
Cell dimensions (L x W x H) |
16.5 x 22.5 x 12.5 cm |
Dimensions of control unit (L x W x H) |
32 x 37 x 12 cm |
Cell lifetime (under good conditions of use) |
7.500 h (titanium plates, ruthenium SC6 treatment) |
Power supply 50 Hz |
220-240 VAC (power cord with overmolded plug) |