Grundfos UPA 15-160

The UPA 15-160 Grundfos pump is a domestic pressure group designed for the increase in drinking water pressure supplied from an external source in homes. UPA pressure increase pumps increase the pressure of the sanitary water so that the required pressure in showers, taps and other water shots are available.

The pump has a 1 inlet port of 1 inch. The nominal pump pressure corresponds to PN 10 and has a port to port of 203 mm. UPA 15-160 provides the comfort of a constant water pressure with automatic start and stop. This is controlled by means of the external flow switch, which guarantees an optimal start -ups of the pressure increase pump according to the demand. The flow switch is supplied with the pump. The design is solid and the materials, resistant to corrosion, together with the hobo hob molten with cataphoresis coating guarantee a long useful life. The pump is of the type of encapsulated rotor, that is, the pump and the engine form an integral unit without closure. This pump should always be installed with a horizontal motor axis. This high efficiency pressure group has an engine of permanent magnets synchronous four poles with frequency converter. The bearings are lubricated with the pumped liquid. These constructive characteristics guarantee a operation that does not require maintenance.

CHARACTERISTICS OF THE GRUNDFOS PUMP 15-160 SCHUKO:

• External flow switch: guarantees automatic start and stop according to the demand
• Low noise level
• Simple installation: online pressure group ready to use
• High efficiency PM technology with ECM
• Integrated anti -return valve
• Improved corrosion resistance
• Integrated motor protection
• The bomb has the following approvals: CE, Weee-Pa.

TECHNICAL CHARACTERISTICS OF THE PUMP GRUNDFOS UPA 15-160 SCHUKO:

• Flow switch: Yes
• PUMPED LIQUID: Water
• Liquid temperature range: 2 .. 95 ° C
• Liquid temperature during operation: 60 ° C
• Density: 983.2 kg/m³
• Nominal flow: 2.95 m³/h
• Nominal height: 9,615 m
• TF class: 95
• Homologations: CE, Weee-Pa
• Hydraulic body: Foundry
• Pump housing: in 1561 EN-GJL-150
• Drive: Composite, PP-GF30
• Range of temperatures environments: 0 .. 40 ° C
• Maximum working pressure: 10 bar
• Connection type: G
• Connection size: 1 inch
• Nominal pressure for connection: pn 10
• Puerto A Port Length: 203 mm
• Maximum entry power: 180 W
• Network frequency: 50 Hz
• Nominal voltage: 1 x 230 V
• Maximum intensity consumption: 1.41 A
• Condensor size - operation: 0.2 µF
• Degree of protection (IEC 34-5): x2D
• Isolation class (IEC 85): F
• Integrated motor protection: Elect.
• Plug: No plug
• Net weight: 3.14 kg

Download technical file