CTX - WallCleaner Plus CTX -51 Cleaner Disinclosed 25 L

Characteristic

Detergent cleaner, especially created to eliminate calcareous inlays, organic waste and mineral sediments that over time are formed and adhere to the pool surfaces.
It is a product studied for cleaning the pool vessel and inside the plastic material filters.

Mode of employment

1) General cleaning of the empty pool.
a) Apply the product without diluting on the surfaces to clean with a spray, extending well the

product on walls and background.
b) Leave act for approximately 1⁄2 and rinse with water abundantly. If the embedding

persist, the operation must be repeated.
It is advisable to use a brush in the parts in which the embedding is more intense.

2) FILTER CLEANING: (This treatment is only valid for filters whose filter load is flint or sand)
a) Totally empty the water inside the filter.
b) Open the filter on top and pour inside the product ensuring that it covers the load

filter.
c) Leave the product 1⁄2 hour approximately.
d) Close the filter and then perform an intense washing.

*Do not use this product on chrome, galvanized or tin surfaces

Recommendations
1) Before cleaning the pool vessel, your surfaces with water should be wet well

(tiles, tiles, etc.).
2) After cleaning with an extra surface surfaces, surfaces with

Abundant water, to eliminate product remains well.
3) If outdoor cleansing are made, avoid working in the direct sun and that the product gets dried. 4) For a first cleaning we always advise the product, without diluting.

Dosage

Use 20 L. of extra uncurpous per 100 m3 of volume of water from the pool.

These doses are orientative and can be modified depending on the hardness and content in water salts.