Sanicubic 2 Pro WP is a general pumping station aimed at evacuating the wastewater of a single -family house, a commercial premises, a gym, etc.

You can receive the waters from several rooms of bathrooms and/or kitchens equipped with sanitary devices of all kinds: toilets, urinary, showers, bathtubs, sinks, sinks, washing machines, dishwasher, etc. It has been developed to resist important intensive and flow uses. Its installation is easy, it can be installed directly to the ground, you only need an electric outlet at 220 V and connect the evacuation tube.

The device is composed of 2 powerful engines of 1,500 W each that allow raising the waters up to 14 meters high or 110 meters away with a flow rate at 3 meters high of 11.3 m3/h. These engines carry a stainless steel sanitritic system that dilapidate effluents and paper residues optimally.

It works with an automatic starting system that starts the engines by means of a micro -monte system: when entering the pump tank, the wastewater moves the air inside a detector, which starts the engine.

Sanicubic 2 pro engines work intelligently: either alternate to each start, or in duet if it suddenly enters a lot. This double engine system provides more security: in the event that some engine was damaged by a foreign body, the Sanicubic 2 Pro could continue working with a single engine while repaired. Thus the service is not interrupted at any time. This device has an IP68 protection index that guarantees tightness and allows you to resist temporary immersion. Because there is no risk of smells.

This pumping station has 5 multi-diameter inputs: 2 inputs on the sides and another 3 at the top of the device. 40 mm, 50 mm, 100 mm or 110 mm tubes can be connected. Sanicubic 2 Pro is designed to resist water up to 70ºC along with intensive use.

The evacuation of wastewater to the same as ventilation is performed using a 50 mm diameter section tube. The evacuation elbow delivered is prepared with an anti-back valve. It is essential that the device is ventilated.

Sanicubic 2 Pro is equipped as standard with a operation surveillance system: a panel communicates with the radiofrequency device and indicates which engine is working, if the device is under voltage or if there is any problem with an engine. We recommend that this panel be located in an “view” area.