Floating isothermal foam isothermal cover characteristics of Astralpool

Its composition is based on reticulated polyethylene foam, which makes it the most effective and resistant coverage within the shelters of the summer category.
It presents a junction by means of thermal welding with double -sided polyethylene tapes.
The edges are sewn by PVC trim.
The subjection is through:
- Ojales at each end on the first side of the width.
- Ojales house 65 cm. approximately on the second side of the width.

Optional presents a floating reinforcement of polyethylene foam on the side of the width.
It is supplied in cardboard box with protective case and instruction manual.
5 mm thickness.

Types of finish:

- Eco model. It presents polyethylene trim, which is sewn on both sides of width. Brass eyelets appear on one side every 65 cm. On one side. It presents two brass eyes at the ends on the other side. 
- Luxe model. It presents perimeter ribe of sewn polyethylene. Brass eyelets appear on one side every 65 cm. On one side. It presents two brass eyes at the ends on the other side. 

For the non -standard or eco models, the price must consult.

Minimum purchase of 10 square meters. *The indicated price is for this amount.



Any non -standard form that requires a template for its manufacture will be considered free form.
For the forms, the correct measures are needed to be able to adapt it to the established templates. 
To do this, describe the shape of the vessel in a rectangle; L is the length and i the height. Surface = l x i
In the event that the glass is a free form, and the standard templates cannot be applied, an extra amount will be applied.
The templates must be reviewed by factory and with the perfectly visible strokes to avoid any possible error.