Astralpool - Multi -action chlorine

Solid compound non -oxidizer in tablets, specially formulated so that with its single application in the pool water it is possible to eliminate bacteria, viruses and microorganisms in general; Avoiding the development of algae and maintaining the water transparent and crystalline. Disinfection of swimming pools built with ceramic materials. This product should not go into direct contact with the pools made of liner, polyester or vinyl, or painted, since it can produce discolorations.

Mode of employment and dossification

Initial treatment: Add 15 grs. of granulated dichloro for each m3 of water. After 2 hours, adjust the pH of the water between 7.2 and 7.6 using solid minor pH or solid plus pH.

MAINTENANCE TREATMENT: With the pH of the adjusted water, add 1 multi -action tablet 250 gr per 25 m3 of water 10 - 15 days. These doses are of a orientative nature and can be modified depending on the characteristics of each pool, weather, etc. The initial treatment (supercloration), should be repeated whenever a lack of transparency in water is appreciated. Introduce the necessary dose of product inside Then putting the filtration equipment into operation, in order to be dissolved the product when the water circulates through the skimmers. It is indispensable that the entire volume of water of the pool is recirculated through the purification equipment daily. Free residual chlorine must be located between 0.5 and 2 mg/l, value that will be easily measured using a chlorine and pH analyzer case. This control should be carried out a minimum of 2 times a day.